MF001 Monolith Formation


A 3D printed microfluidic monolith formation device with a top-down window, input reservoir, and output side channel.

SKU: MF001 Category:

MF001 is a 3D printed device designed for microfluidic monolith formation. It has a single channel with a top-down window for minimal UV absorption in a small region where a monolith is formed. It has an input reservoir for gravitational flow and a side port (~1.1mm) for the output. The space between the window and the channel is μm

Some applications of monoliths are listed below.

Each of the dimensional specs of the design are based on a 7.6μm pixel pitch design The actual size of the features will be affected by exposure and print settings.


  • Chromatography
    • affinity chromatography, size exclusion chromatography, reversed phased chromatography, normal phase chromatography, etc.
  • Extraction
  • Electrophoresis
  • Selective Polymerization
Weight N/A
Width Window

198 μm, 251 μm, 304 μm

Reservoir Diameter

1.5 mm, 1.9 mm, 2.3 mm

Channel Cross Section

30 μm x 30 μm, 38 μm x 40 μm, 46 μm x 50 μm, 53 μm x 50 μm

Resin - Ink - Material


Shopping Cart