ST001 is a 3D printed straight channel microfluidic device. It has 2(1.1mm) IO pins on the side so chip to world tubing can be inserted out of the way for the top down imaging. A single channel used in microfluidic applications listed below is 3D printed into the bulk.
Each of the dimensional specs of the design are based on a 7.6μm pixel pitch design The actual size of the features will be affected by exposure and print settings.
Applications:
- Inertial Focusing
- Measuring Shear Rate/Shear Stress
- Particle Tracking
- Cell Culture
- Flow Sensor
- Surface Microfluidics