TS001 – T Shaped – Cross Channel Microfluidic Device

$40.00$50.00

A 3D printed T-shaped channel with side ports

SKU: TS001 Category:

TS001 is a T Shaped 3D Printed Microfluidic Device (also known as a cross channel device). It has 3 (1.1mm) IO pins on the side so chip to world tubing can be inserted out of the way for the top-down imaging. The channel at the top of the “T” is ~9.1mm and the channel that makes up the stem of the “T” is ~16mm. Some applications of T-shaped microfluidic devices are listed below.

Each of the dimensional specs of the design are based on a 7.6μm pixel pitch design The actual size of the features will be affected by exposure and print settings.

Applications:

  • Flow Focusing
  • Electrophoresis
  • Droplet Generator
  • Microreactor
  • Fluid Interface Junctions
  • Sheath Flow
Resin - Ink - Material

PEG-I-N, PEG-I-A, HDDA/LA-I-N, HDDA/LA-I-A

Channel Cross Section WxH

30μm x 30μm, 60μm x 60μm, 90μm x 90μm

Shopping Cart